McElroy Discussion Forums

McElroy Fusion Discussion
It is currently April 16th, 2021, 10:22 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Heater thermometers
PostPosted: August 16th, 2006, 3:35 pm 
Offline
Prior Board Member

Joined: August 16th, 2006, 2:05 pm
Posts: 137
My Company fuses a lot of plastic (1-6" dia.) and maintains a number of heaters. I have a couple of questions. I understand the thermometer indicates internal temperature and is for reference only. Our contractor indicates the heater thermometers are often inaccurate. What kind of inaccuracy should be allowed before considering sending heaters in for thermometer replacement? This would be very expensive and time consuming. Can these thermometers be adjusted or calibrated? Thanks, Don


Top
 Profile  
 
 Post subject:
PostPosted: August 16th, 2006, 3:36 pm 
The thermometers in the heaters are for reference only. They do read internal temperature but will give you a good indication that the heater is up to temperature and working properly. You should always use a pyrometer to check the actual surface temperature prior to making a fusion joint. Most of the time the temperature shouldn't differ more than 25 degrees from your pyrometer reading.
The thermometers cannot be re-calibrated or adjusted. However, they are very easy to replace and replacement parts can be purchased from your local distributor. Check the following link for a distributor in your area: http://www.mcelroymfg.com/fusion/buyit/buyit.htm
The most common problem with these thermometers is mechanical damage. If you have any that have been cracked or bent, I would recommend replacing them. You simply need to unscrew the thermometer. They are a stem type with a screw thread just under the dial.


Top
  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group