McElroy Discussion Forums
http://forums.mcelroy.com/fusion/

PVC retro-fit
http://forums.mcelroy.com/fusion/viewtopic.php?f=2&t=1446
Page 1 of 1

Author:  AMcMillan [ February 7th, 2012, 3:20 pm ]
Post subject:  PVC retro-fit

i seem to be getting an influx in requests for PVC machines

i have searched and searched the parts finders but cant find the Retro fit kits for the larger diameter machines or a parts list for what needs to be ordered

i need to convert some 1236s, T900s, and 824s,

Author:  Joshua [ February 8th, 2012, 11:36 am ]
Post subject:  Re: PVC retro-fit

Here are the kit numbers for the smaller machines.
AT1208801 T412 Blade & Fcv Retro Kit
AT1817301 T618 Blade & Fcv Retro Kit
AT5036701 T500II Blade & Fcv Retro Kit
AT808501 T28 Blade & Fcv Retro Kit

The parts needed to convert a larger machine is going to depend on the vintage of the unit. If the temperature controller has to be updated, the retrofit will be more difficult. Other than that, here are the parts to change:

Heater and buttplates for 36" units (changes to radial heater and thicker butt plates)
Facer blades (same part number, but add a c at the end for coated blades)
A facer flow control valve AT9032102 for T900 machines

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/