McElroy Discussion Forums
http://forums.mcelroy.com/fusion/

Calibrate
http://forums.mcelroy.com/fusion/viewtopic.php?f=2&t=1529
Page 1 of 1

Author:  David [ March 7th, 2013, 5:23 pm ]
Post subject:  Calibrate

Is there a manufacture recommended time frame when we should pull a 1 LC and a 2 LC out of the field to calibrate?

Author:  Jason [ March 7th, 2013, 5:46 pm ]
Post subject:  Re: Calibrate

No, on both machines there is nothing to calibrate.

We do have maintenance guidance in our operator's manuals that may be of help, but as long as the mechanism moves smoothly, without excessive play, and the locking cams function properly, there is no reason to worry about the machine.

If the machine is no longer producing satisfactory joints, it can often be rebuilt or repaired to return it to optimal function.

Hope this helps,
Jason

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/