McElroy Discussion Forums
http://forums.mcelroy.com/fusion/

Dipstick for TracStar 412 and 618 with Kubota Engines
http://forums.mcelroy.com/fusion/viewtopic.php?f=2&t=1615
Page 1 of 1

Author:  Joshua [ May 17th, 2013, 4:51 pm ]
Post subject:  Dipstick for TracStar 412 and 618 with Kubota Engines

I get this question from time to time.

The dipstick part number is a MDA00216.

The engine part number is MDA00121

Author:  Joshua [ June 19th, 2013, 4:22 pm ]
Post subject:  Re: Dipstick for TracStar 412 and 618 with Kubota Engines

We have heard of a few of these breaking lately. Here is what we think is going on. We had this happen in assembly within moments of startup and attribute it to bending the dipstick below the rubber when inserting, so that when the dipstick is fully inserted the bent end is touching the crank. The other possibility is inserting below the fuel hose with the hose pushing the dipstick down and holding against crank.

Author:  Doug Kimblern [ September 12th, 2013, 4:19 pm ]
Post subject:  Re: Dipstick for TracStar 412 and 618 with Kubota Engines

In addition to the parts listed by Josh in the previos post I have had several request for the starter for the Kubota 20hp (D722) engine for the Tracstar 412 and 618. The starter is Pt #67980-31150 and typically in stock with Kubota.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/