McElroy Discussion Forums
http://forums.mcelroy.com/fusion/

Fill cap and strainer
http://forums.mcelroy.com/fusion/viewtopic.php?f=2&t=1678
Page 1 of 1

Author:  S_Zell [ March 6th, 2014, 9:24 am ]
Post subject:  Fill cap and strainer

We have a 28 Machine Model 860805. Removed the Hydraulic Fill cap to add fluid and found dirt in sceen of fill. Removed the screen to clean and not sure how it was being sucured to the fill. The screws apear to do nothing. Is there a replacement fill screen for this machine/

Author:  Dan Rouse [ March 6th, 2014, 12:43 pm ]
Post subject:  Re: Fill cap and strainer

My experience with these is that there is/was a threaded tab attached to the screw that when tightened would be sucked up under the inside lip of the filler neck.
Going off of the machine model # you supplied the replacement part # would be MFK00004. Hope this helps.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/