McElroy Discussion Forums
http://forums.mcelroy.com/fusion/

T500 coach conversion
http://forums.mcelroy.com/fusion/viewtopic.php?f=2&t=1704
Page 1 of 1

Author:  CHOUSE1979 [ July 8th, 2014, 10:23 am ]
Post subject:  T500 coach conversion

I have a customer's machine, it is a T500 COACH unit. They are wanting to convert it to a non coach unit. Is there a part number for this?

Author:  Jacob Stone [ July 9th, 2014, 2:05 pm ]
Post subject:  Re: T500 coach conversion

We do have some Coach to Manual conversion kits for the T500 machines. Which kit to get depends on the machine.

For T500 machines produced prior to May 1998 and do not have a facer manifold, you’ll want to use AT5035502.
For T500 machines produced after May 1998 you’ll want to use AT5035501.
For T500 Series II machines you’ll want to use AT5035503.

Here is the instruction sheet for the T500: http://fusion.mcelroy.com/parts_finder/ ... ?832132507
And here is the instruction sheet for the T500 II: http://fusion.mcelroy.com/parts_finder/ ... 1981565209

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/