Was there a resolution to this problem? Curious minds want to know.
| McElroy Discussion Forums http://forums.mcelroy.com/fusion/ |
|
| lose of hydraulic pressure on T900 http://forums.mcelroy.com/fusion/viewtopic.php?f=2&t=1997 |
Page 1 of 1 |
| Author: | GeneralQuestion [ July 27th, 2016, 2:19 pm ] |
| Post subject: | lose of hydraulic pressure on T900 |
machine number T9062 serial number C75570 hmr 56.3 This is Eric Myers from ISCO in martinsburg wv. I have this machine that we just replaced the hydraulic pump under warranty. The problem is that after machine warms up we lose hydraulic pressure to entire machine and carriage. start up pressure is 2300 psi after 30 to 45 mins system pressure will drop to 300 psi. have switched out hydraulic fan motors still have issue. removed carriage from system and still have issue. Can some one please give me some information if the replacement pump is defective or if I have a problem in the system past the pump, maybe relief valve or bypass valve. thanks Eric Myers ISCO 443-553-9734 |
|
| Author: | Joshua [ July 29th, 2016, 1:25 pm ] |
| Post subject: | Re: lose of hydraulic pressure on T900 |
Give us a call when you get a second. I am also suspicious of the diverter valve. |
|
| Author: | jgeschke [ October 13th, 2016, 9:51 am ] |
| Post subject: | Re: lose of hydraulic pressure on T900 |
Was there a resolution to this problem? Curious minds want to know.
|
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|