McElroy Discussion Forums

Here is a quick reference guide for all of you who are looking for cylinder seal kit part numbers. this is not a complete list, I will update as time permits.

Cylinder--- Cylinder
Part no.----- Kit No.
MEB00014 = MEQ00052
MEB00015 = MEQ00038
MEB00016 = MEQ00041
MEB00017 = MEQ00054
MEB00020 = MEQ00053
MEB00025 = MEQ00051
MEB00028 = MEQ00055
MEB00029 = MEQ00056
MEB00030 = MEQ00057
MEB00031 = MEQ00058
MEB00032 = MEQ00058
MEB00033 = MEQ00058
MEB00039 = MEQ00044
MEB00040 = MEQ00044
MEB00041 = MEQ00059
MEB00042 = MEQ00064
MEB00043 = MEQ00051
MEB00051 = MEQ00056
MEB00052 = MEQ00056
MEB00055 = MEQ00051
MEB00056 = MEQ00051
MEB00057 = MEQ00037
MEB00058 = MEQ00037
MEB00092 = MEQ00064
MEB00095 = MEQ00066
MEB00096 = MEQ00097
MEB00097 = MEQ00097
MEB00104 = MEQ00052
MEB00109 = MEQ00083
MEB00110 = MEQ00080 For Carlson cylinders/MEQ00100 For Canada cylinders
MEB00111 = MEQ00084 For Carlson cylinders/MEQ00101 For Canada cylinders
MEB00112 = MEQ00055
MEB00118 = MEQ00075
MEB00119 = MEQ00071
MEB00120 = MEQ00071
MEB00121 = MEQ00073
MEB00122 = MEQ00070
MEB00124 = MEQ00072
MEB00126 = MEQ00075
MEB00127 = MEQ00077
MEB00128 = MEQ00076
MEB00129 = MEQ00074
MEB00150 = MEQ00107 for Canada cylinders / MEQ00136 for Carlson / MEQ00139 for Texas Hydraulics
MEB00156 = MEQ00112 for Canada cylinders / MEQ00116 for Carlson
MEB00157 = MEQ00120
MEB00158 = MEQ00121
MEB00168 = MEQ00122 For Carlson cylinders
MEB00175 = MEQ00123 For Carlson cylinders
T9015001 = MEQ00082 For Carlson cylinders/ MEQ00111 For Canada cylinders
LT0082 = MEQ00018

If you need a seal kit for a cylinder that isn't listed, please post a reply with the part number of the cylinder that you want to have added to the list.

MEB00156

List updated.

MEQ00101?

never mind

There is already a post in our forums about this but if you need the seal kit for the a hand pump:

MEA00088 = MEQ00114

Can you please explain the difference between the Canada and Carlson MEB00150 cylinders?

"There are some stamping differences but it looks like the easiest way to tell is that the Carlson cylinder cap on the rod end has holes on the face where CTD has the holes on the circumference of the face cap. The attached document shows it in an illustrated form".

Thanks.

WHATS THE PART NUMBER TAKING PLACE OF THE SEAL KITS FOR MEB58? IT WAS MEQ00037 BUT I SEE THIS IS NO LONGER A GOOD #.

Unless the cylinder has changed, the p/n is still correct. Give us a buzz and we can get this p/n reactivated.